1600 Series is single phase UPS, available in 3.6kVA, 6.0kVA, 8kVA, 10.0kVA, 12kVA, 14kVA & 18kVA. This series offers in tower design solution. As a double conversion on-line UPS, it is able to supply uninterrupted, clean single-phase power to your critical systems while keeping batteries charged continuously, even if the utility power fails. This 1600EP Series will provide you with an additional 20% Extra Power! From a name that is synonymous with quality. This system combines true on-line technology, state of the art electronics and the Toshiba name to offer a high reliability UPS.
Other features of the UPS include:
- Hot Swappable Batteries
- Hot Swappable Cooling Fans
- Internal Isolation Transformer
- Digital LCD Display
- Wide Input Voltage Window
|
- Wide Input Frequency Window
- Input Power Factor greater than 0.95
- Power Factor Correction
- Output Power Factor 0.85
- Optional Network Interface Card
- Optional Environmental Monitoring Device
|
 Click Here for the Full
Brochure. (1MB)
|
| Capacity |
3.6kVA(3.06kW) |
6kVA(5.1kW) |
8kVA(6.8kW) |
10kVA(8.5kW) |
14kVA(11.9kW) |
18kVA(15.3kW) |
| Topology |
True On-line, Double Conversion, IGBT Power Factor Corrected Input, & Internal Isolation Transformer |
| Certifications |
UL 1778, CUL, CE, FCC Class A, IEEE 587, ANSI / C62.41, ISO 9001, ISO 14001, NEMA / PE1-1993 |
| Input Characteristics |
| Input Voltage |
Single-Phase 208/240 Vac (3 Wire Input / L-L,G), 230 Vac (3 Wire Input / L, N, G), +10% -30% |
| Input Frequency |
45 - 65 Hz (Auto-Sensing) |
| Input Power Factor |
> 0.95 for all loads |
| Input Current THD |
< 5% (Even for 100% Non-Linear Loads) |
| Battery Characteristics |
| Battery Type |
Valve Regulated Lead Acid, Flame Retardant (9.0 Amp Hr) |
| Backup Time - Fully Charged at 0.85 Power Factor, 77deg. F |
14 minutes |
7 minutes |
7 minutes |
5 minutes |
7 minutes |
5 minutes |
| |
Approximately 30% More Runtime for Output Power Factor of 0.7 (Triple the Backup Time at 1/2 load) |
| Recharge Time |
24 hr. (full), 12 hr. (90%) |
| DC Link |
216 VDC |
288 VDC |
| Output Characteristics |
| Output Voltage |
Single Phase 240/208/120 Vac (4 Wire Output / L-L, N, G) 230 Vac (3 Wire Output L, N, G) |
| Output Voltage Regulation |
+/- 3% Max., +/- 1% Typical |
| Output Frequency |
50/60 Hz +/- 0.5Hz/1Hz/1.5Hz (Factory or Authorized Service Center selectable.) |
| Output Voltage THD |
< 3% for linear load; 1% Typical |
| Common Mode Noise |
< 0.5V Peak |
| Rated Load Power Factor |
0.85 (0.6-1.0) lag |
| Efficiency (ac-dc-ac) |
> than 85% |
| Rated Output Current @ 240V |
15A |
25A |
33.3A |
42A |
58A |
75A |
| Max. Peak Output Current |
45A |
75A |
100A |
126A |
174A |
225A |
| Overload Capacity |
150% for 10 Seconds / 125% for 10 Minutes / 1000% for 1 cycle |
| Heat Generation (BTU/Hr) |
1588 |
2610 |
3482 |
4352 |
6092 |
7832 |
| Mechanical Design |
| Enclosure |
Enclosure of Unit made from Steel which Complies with NEMA 1 and UL Type 1 Standard |
| Enclosure Dimensions |
27.5" x 10" x 33" |
28.25" x 13" x 33.5" |
39.1" x 17.5" x 34.8" |
| Shipping Weight |
365 lbs./166 kg |
385 lbs./175 kg |
490 lbs./222 kg |
620 lbs./281 kg |
750 lbs./340 kg |
| Battery Pack Size |
5"H x 7.3"W x 18.2"D (6 Batteries of NPX-35 Per Pack) |
| Battery Pack Quantity |
3 |
4 |
8 |
| Options |
| RemotEye II® |
SNMP & WEB Based Monitoring, Internal and External Modules Available. |
| Matching Battery Cabinet |
Consult Factory |
| Internal / Ext. Maintenace Bypass |
Consult Factory |
| Receptacle Panel & Line Cord |
Consult Factory |
| Warranty |
3 Years on Electronics (UPS) / 2 Years Full on Battery ( See Toshiba Warranty Policy for Full Details) |
|
