 DiamondLink is an advanced, user-customizable power monitoring, management, and shutdown software designed to provide information about the power conditions of the UPS system. DiamondLink will monitor the health and status of your UPS system and, when critical events occur, will notify you and perform a graceful, unattended shutdown.
DiamondLink can be configured to perform appropriate actions when an event is
detected. The user configurable actions include:
- Broadcasting – Send event messaging to managers on your
system
- E-mail – Send e-mails or pages as events occur with your UPS
system
- SNMP Messaging – Send SNMP messaging to NMS managers
- Operating System Shutdown – Shutdown your servers when power
is running low
The NetCom hardware SNMP/Web adapter runs an embedded Simple Network
Management Protocol (SNMP) software agent. This powerful and intelligent
unit is designed for the rigorous task of managing the UPS systems that
protect equipment and the critical data residing throughout the network. The
NetCom features:
Remote UPS status monitoring –
Monitor a remote UPS system using an RS-232 Cable to the NetCom for one
UPS system to a remote workstation (NMS) through an Ethernet connection
- Web Card – Assign an IP address to your UPS system to monitor and
control the UPS system from anywhere around the world
- SNMP Adapter – Turn the UPS system’s protocol into an SNMP software
agent and enable SNMP traps
- SNMP Viewer – Unique Mitsubishi design that color coordinates SNMP
messages that inform the NMS about all current UPS alarms
- Send Shutdown Signal to Networked Servers – Send a shutdown signal
to servers connected via the Ethernet network
- Battery and Service Monitoring – Monitor the battery life and
servicing details of the UPS
- E-mail – Send the Administrator an e-mail when an event occurs
ModBus Communications for Building Management Systems
The MUCM card allows the customer to
integrate Mitsubishi Electric UPS systems into their current Building
Management Solution. The MUCM is a
user-programmable protocol converter, or data concentrator, that is DIN-rail
mountable, with 2 serial ports: One RS-232, one RS-485, and over 2,048
internal mailbox registers. Through the ModBus protocol converter, the UPS
system’s variables can be monitored through various Building Management
System vendors’ software. |
Use of Intelligent Power Module transistors enables efficient high-speed
switching (8kHz), thus reducing heat dissipation in the UPS. (Higher
efficiency means lower cost per kilowatt to the customer.)
System metering
